Switchboard guide
Do I need a switchboard upgrade?
A practical page for Adelaide homes with old fuses, frequent tripping or bigger future loads on the way.
Send switchboard photos ↗
Common signs
If these sound familiar, it’s worth asking.
✓
Ceramic fuses
Older boards often need modern protection and a cleaner layout.
Older boards often need modern protection and a cleaner layout.
✓
Repeated tripping
Especially when appliances, EV charging or cooling are added.
Especially when appliances, EV charging or cooling are added.
✓
No visible spare ways
The board may be full before the next project even starts.
The board may be full before the next project even starts.
Worth knowing
What "no" actually looks like
Not every board needs replacing. A newer board with safety switches on every circuit, visible spare ways and no history of nuisance tripping is usually fine as-is, even if it's a decade or two old.
What tips the answer to "yes" is usually a combination: ceramic fuses plus a new EV or induction load, or a full board with no room for the renovation you're planning. A photo of the open board is normally enough for a first opinion — you don't need to guess.
FAQs
Switchboard upgrade questions
?
Is this only for old houses?
No. Even newer homes can need an upgrade after load changes or builder-grade installs.
No. Even newer homes can need an upgrade after load changes or builder-grade installs.
?
Can I add EV later without an upgrade?
Sometimes, but a photo-based assessment is the safest way to know.
Sometimes, but a photo-based assessment is the safest way to know.
?
Should I upload photos?
Yes. The switchboard and meter location are the best two pictures to start with.
Yes. The switchboard and meter location are the best two pictures to start with.